Jun 30 2016

Concrete Mixers, Reduction Gears and Other Machines to Columbia

On June 27, 2016, we sent two sets of JS500 concrete mixers, two reduction gears and other accessories to Columbia.

JS series concrete mixer not can work independently, but also work with PLD series aggregate dosing machine to make a simple concrete plant or is adopted as the mixer in the high-end concrete batching plant. In addition, JS500 concrete mixer discharging volume is 500L and charging volume is 800L.

You can visit the construction site there and we can provide you with the best service.

concrete mixer

Contact us:

E-mail: info@daswell.com

Tel: 0086 371 65669681

Fax: 0086-371-55186675

Web: www.daswell.com

 

Jun 29 2016

Twin Shaft Concrete Mixers and Other Machines Were Sent to Columbia

Daswell sent two JS500 twin shaft concrete mixers, reducers and some other machines to Columbia successfully on Jun 27, 2016.

Daswell JS500 concrete mixer is designed according to international standards. Twin shaft electric cement mixer has characteristics of reasonable structure, good mixing quality, short mixing time, low energy consumption and little noise, etc. The Columbia customer was visited our factory before he ordered these machines and Daswell gave him deep impression on our high quality and standard manufacturing process.

You can visit the construction site there and we can provide you with the best service.

concrete mixer

Contact us:

E-mail: info@daswell.com

Tel: 0086 371 65669681

Fax: 0086-371-55186675

Web: www.dwmixers.com

 

Jun 29 2016

Daswell JS500 Concrete Mixers, Reducers and Accessories to Columbia

On June 27, 2016, Daswell sent two sets of JS500 concrete mixers, two reducers and a series of accessories to Columbia.

 

JS500 twin shaft concrete mixer has dual horizontal shafts. It not only can work independently, but also can be used in the concrete batching plant with corresponding dosing machine. The twin shaft concrete mixer can be applicable to large, medium and small precast concrete products factory and roads, railways, bridges, water conservancy, civil construction project. Along with JS500 concrete mixers, other machines were sent to Columbia together.

 

You can visit the construction site there and we can provide you with the best service.

 

js500 concrete mixer

 

Contact us:

E-mail: info@daswell.com

Tel: 0086 371 65669681

Fax: 0086-371-55186675

Web: www.dwblockmakingmachine.com

 

Jun 28 2016

Daswell Concrete Mixing Plant Can Produce Hydraulic Concrete

In recent years, with the development of urbanization and infrastructure construction, a lot of county areas speed up the development speed, which has played a very big role for these areas’ construction and building materials industry, and also has promoted the development of the construction machinery industry, such as concrete station. Concrete mixing plant manufacturers increased in recent years, and the competition is fierce, there are a number of manufacturers competing on price in order to seize market competition, and in order to save costs to ensure profits, they make discount on the quality of the product. Daswell machinery always puts product quality in the first place, and constantly inputs costs for equipment research, development and improvement, and improves our competitiveness through technology.

 

concrete batching plant

 

By means of promoting equipment’s functions, such as environmental protection, efficiency, performance and quality, now Daswell forced concrete mixer, mobile batching plant, and stabilized soil mixing station have received the consistent high praise from customers at home and abroad.

 

Jun 28 2016

Daswell Concrete Mixing Plant Can Produce Hydraulic Concrete

The so-called hydraulic concrete is different from ordinary concrete. Due to some buildings are regularly or periodically subjected to water, so they need to adapt this kind concrete. Such as flood control, irrigation, power generation, water supply, shipping and other projects, they all need hydraulic structure. The concrete production needs to use specialized equipment of concrete mixing station.

Hydraulic concrete is mass concrete basically, it has larger volume compared with ordinary buildings and municipal engineering concrete and has higher request on the crack resistance and durability.

concrete batching plant

The mixing of special performance concrete precast needs to use special materials and matching way. Especially in the process of production, material proportioning accuracy must be right. Only professional fully automatic concrete mixing plant can do it better, and Henan Daswell Machinery must be your first choice.

 

Jun 27 2016

Precaution Test of Daswell Concrete Mixing Station

First, personnel training of raw material and specification test procedure
For Daswell concrete mixing sation, every personnel engaged in the work of testing before mount guard system of pre-service training, after obtain license, shall not engage in testing work. Daswell concrete mixing plant’s strict operating procedures and operation specification is the premise to ensure the final test results are scientific and fair.

Then, necessity of the raw material test system
For the scale of the construction project of Daswell concrete mixing station, establish corresponding grade test institutions and quality assurance system, which is responsible for the quality of engineering materials.

At last, the maintenance of test equipment
Configure complete test equipment and related equipment according to the requirement of the standard specification of concrete mixing station, and establish the uniform measure equipment parameter and the periodic table of equipment calibration .
Jun 27 2016

A. For concrete batching plant, qualified sand and stone should be arranged according to the technical characteristics and aggregate particle size should be within the permission scope.
B. the unit should be started step by step. Then, after the workings of the parts and the instructions are normal, the pressure of the oil, gas and water should be complied with the requirements, operators can start working.
concrete batching plant
C. It is forbidden to enter around feeding mouth in a storage area in the process of operation.
D, before concrete mixer in concrete mixing station stops working, it should be unloaded, and then switch off the ministries and pipeline in sequence. Weighing system’s knife and knife edge should be cleaned, and shall ensure that the weighing is accurate.
Jun 23 2016

Unload Test of Daswell Concrete Mixer

First, Start concrete mixer and make the shaft rotates in opposite direction. If the direction is wrong, we should change the power supply wiring.

Then, pull out the brake pin and promote hopper, and in the process of ascension, switch two up-link switches with all hands, make the hopper be able to immediately stop, when the hopper is ascending to the discharge position, it should be able to stop automatically. In the process of hopper is promoting and down, hopper should be stopped at any position, when it is necessary, adjust the brake motor big nut.

twin shaft concrete mixer

Following, when the hopper falls, there is no stuck phenomenon in a horizontal fork. When it is down to the pit, drum should be able to stop automatically.

Promote repeatedly hopper, hopper should be freely up and down, smoothly, quickly and accurately switch switch.

At last, discharging door should be opened and closed flexibly, and the position is accurate.

 

Jun 22 2016

Daswell Concrete Mixer Was Exported to Indonesia

On June 8, 2015, SICOMA concrete mixer was exported to Indonesia successfully.

It is not the first sale in Indonesia, and we have sent JZR and JS concrete mixers. It is a promising market and we pay much attention there. Sicoma twin shaft concrete tools have double helix blade shaft design which make the space in the mixing drum can be used, the mixing energy of mixing blades be released and the material be move completely. Compare the single shaft concrete machine, its mixing time is shot, the mixing effect is even and the efficiency is more higher.

sicoma concrete mixer

Contact us:

E-mail: info@daswell.com

Tel: 0086 371 65669681

Fax: 0086-371-55186675

Web: www.dwmixers.com

 

Jun 15 2016

Learn about Double Shaft Concrete Mixer Drive System

Double shaft concrete mixer’s mixing system is composed of motor, pulley, gearbox, open gear, mixing tank, mixing device, lubrication device, etc.

 

Through a small pulley and belt pulley, motor drives secondary gear transmission, the two output shaft speed reducers drive respectively two level configuration stirring shaft through the open big gear wheel and open pinion to reverse constant rotation.

 

twin shaft concrete mixer

 

In order to ensure the quality of seal, the device is equipped with a dedicated oil feeder, and oil supply device is fixed on the mixing barrel end face. When injected into the oil feeder grease, we must pay attention to clean it, and do not mix with sundry. In order to guarantee the normal operation of stirring shaft, we should often add yellow grease to the bearing.

WordPress Themes